|
BFLY-PGE-05S2C-CS |
|
BFLY-PGE-05S2M-CS |
|
|
0.5 MP |
-
Sony ICX693 CCD, 1/3", 6.0 µm
-
Global shutter
-
808 x 608 at 50 FPS
|
|
BFLY-PGE-09S2C-CS |
|
BFLY-PGE-09S2M-CS |
|
|
0.9 MP |
-
Sony ICX692 CCD, 1/3", 4.08 µm
-
Global shutter
-
1288 x 728 at 30 FPS
|
|
BFLY-PGE-13S2C-CS* |
|
BFLY-PGE-13S2M-CS* |
|
|
1.3 MP |
-
Sony ICX445 CCD, 1/3", 3.75 µm
-
Global shutter
-
1288 x 964 at 22 FPS
|
|
BFLY-PGE-13E4C-CS |
|
BFLY-PGE-13E4M-CS |
|
|
1.3 MP |
-
e2v EV76C560 CMOS, 1/1.8", 5.3 µm
-
Global shutter
-
1280 x 1024 at 60 FPS
|
|
|
|
1.4 MP |
-
Sony IMX104 CMOS, 1/3", 3.75 µm
-
Rolling shutter
-
1296 x 1032 at 60 FPS
|
|
|
|
2.3 MP |
-
Sony IMX136 CMOS, 1/2.8", 2.8 µm
-
Rolling shutter
-
1920 x 1200 at 27 FPS
|
* Available Q3 2013
Imaging Performance
(EMVA 1288) |
See the Imaging Performance Specification, which includes quantum efficiency, saturation capacity (full well depth), read noise, dynamic range and signal to noise ratio. |
|
A/D Converter |
10-bit (BFLY-PGE-13E4)/12-bit |
|
Video Data Output |
8, 12, 16 and 24-bit digital data |
|
Image Data Formats |
Mono8, Mono12, Mono16, Raw8, Raw12, Raw16 (all models); RGB, YUV411, YUV422, YUV 444 (color models) |
|
Partial Image Modes |
Pixel binning, decimation, and region of interest (ROI) modes |
|
Image Processing |
Gamma, lookup table, hue, saturation, and sharpness |
|
Shutter |
Global shutter; Rolling shutter (BFLY-PGE-14S2/BFLY-PGE-23S2); Automatic*/manual/one-push* (*free running only for CMOS)
0.038 ms to 3 seconds (BFLY-PGE-05S2); 0.1 ms to 3 seconds (BFLY-PGE-09S2); 0.015 ms to 1 second (BFLY-PGE-13E4) |
|
Gain |
Automatic*/manual/one-push* (*free running only for CMOS)
0 dB to 24 dB (BFLY-PGE-05S2); -4.5 dB to 24 dB (BFLY-PGE-09S2); 0 dB to 18 dB (BFLY-PGE-13E4) |
|
Gamma |
0.50 to 3.99, programmable lookup table |
|
White Balance |
Automatic*/manual/one-push* (*free running only for CMOS) |
|
Color Processing |
On-camera in YUV or RGB format, or on-PC in Raw format |
|
Digital Interface |
Gigabit Ethernet interface with screw locks for camera control and data; Power over Ethernet |
|
Transfer Rates |
10/100/1000 Mbit/s |
|
GPIO |
6-pin Hirose HR10A-7R-6PB GPIO connector for trigger, strobe, and power |
|
External Trigger Modes |
Standard, low smear (BFLY-PGE-05S2, BFLY-PGE-09S2), overlapped (BFLY-PGE-05S2, BFLY-PGE-09S2), multi shot |
|
Synchronization |
Via external trigger or software trigger |
|
Image Buffer |
16 MB frame buffer |
|
Memory Channels |
2 user configuration sets for custom camera settings |
|
Flash Memory |
512 KB non-volatile memory |
|
Dimensions |
29 mm x 29 mm x 30 mm excluding lens holder, without optics (metal case) |
|
Mass |
36 grams (without optics) |
|
Power Consumption |
Power over Ethernet (PoE); or 12 V nominal (5 - 16 V) via GPIO interface, maximum 2.5 W (2 W BFLY-PGE-13E4) |
|
Machine Vision Standard |
GigE Vision v1.2 |
|
Camera Control |
Via FlyCapture SDK or GigE Vision third party software |
|
Camera Updates |
In-field firmware updates |
|
Lens Mount |
CS-mount (5 mm C-mount adapter not included) |
|
Temperature |
Operating: 0° to 45°C; Storage: -30° to 60°C |
|
Compliance |
CE, FCC, RoHS |
|
Operating System |
Windows, Linux (32- and 64-bit) |
|
Warranty |
3 years |
Development Kit Contents
The Blackfly does not offer a Development Kit
Available Accessories (Sold Separately)
ACC-01-0003 Tripod mount adapter
ACC-01-5004 C to CS-mount adapter
ACC-01-1100 Intel PRO 1000 CT Gigabit Ethernet PCI Express x1 Interface Card
ACC-01-9011 12V 1.5A Wall-Mount Power Supply, Plug Adapters, HR10 GPIO Wiring Harness
ACC-01-9012 19.6W Single Port Power over Ethernet Injector with NA power cord
ACC-01-3009 1.0-meter, Circular 6-pin pre-wired GPIO Hirose Connector
ACC-01-3010 4.5-meter, Circular 6-pin pre-wired GPIO Hirose Connector
ACC-01-3011 6-pin Circular Hirose HR10 GPIO Connector
|